SM-G900V 6.0.1 Arabic Remove App Verizon Remove logo done By EFT Dongle

SM-G900V 6.0.1 Arabic done By EFT Dongle

SM-G900V 6.0.1 Arabic Remove App Verizon Remove logo done By EFT Dongle

1. Put phone into Download Mode.
2. Connect the phone to PC via Micro USB cable.
3. Install required driver.
4. Select firmware file.
5. Click "Write firmware" button.
6. Follow software instructions (prompts).

Note: Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Back to main menu

5. Direct Unlock

1. Take out SIM card from phone.
2. Connect powered-on phone to PC via cable.
3. Install necessary driver.
4. Click "Unlock" button.
5. Follow software instructions (prompts).

Back to main menu

6. Repair IMEI

1. Root your phone manually.
2. Connect powered-on phone to PC via Micro USB cable.
3. Install necessary driver.
4. Click "Repair Security/Wipe Security" button.
5. Click "Write Cert" button.
6. Follow software instructions (prompts).

Note: After performing this steps, your device will be unlocked and IMEI will be changed to the one from Certificate file.
Back to main menu

7. Reset Screen Lock

1. Click "Reset Screen Lock" button.
2. Put phone in Download Mode.
3. Connect the phone to PC via Micro USB cable.
4. Follow software instructions (prompts).

Note: It is necessary to write CUSTOM recovery to perform "Reset Screen Lock" operation. WARNING! Performing third-party recovery may void the phone's warranty!
Note: After the operation will be successfully completed, You need to draw any pattern, if Pattern Lock was set, or enter any password, if Password Lock was set.
Back to main menu

8. Reset FRP/Reactivation Lock

Method 1. Via Download Mode (Persistent)

1. Click "Reset FRP/Reactivation" button.
2. Put phone in Download Mode.
3. Connect the phone to PC via Micro USB cable.
4. Follow software instructions (prompts).

Back to main menu

9. Read QCN

1. Connect powered-on phone to PC via Micro USB cable.
2. Install necessary driver.
3. Click "Read QCN" button.
4. Follow software instructions (prompts).

Back to main menu

10. Write QCN

1. Connect powered-on phone to PC via Micro USB cable.
2. Install necessary driver.
3. Click "Write QCN" button.
4. Follow software instructions (prompts).

Back to main menu

11. Write Certificate

1. Root your phone manually.
2. Wipe Security
3. Connect powered-on phone to PC via Micro USB cable.
4. Install necessary driver.
5. Click "Write Cert" button.
6. Follow software instructions (prompts).

Back to main menu

12. Wipe Security

1. Root your phone manually.
2. Connect powered-on phone to PC via Micro USB cable.
3. Install necessary driver.
4. Click "Repair Security/Wipe Security" button.
5. Follow software instructions (prompts).

Back to main menu

13. Reset MSL

1. Connect powered-on phone to PC via Micro USB cable.
2. Install necessary driver.
3. Click "Reset MSL" button.
4. Follow software instructions (prompts).

Back to main menu

14. Fast Reset MSL (without Root)

1. Connect powered-on phone to PC via Micro USB cable.
2. Install necessary driver.
3. Click "Fast Reset MSL" button.
4. Follow software instructions (prompts).

Back to main menu

15. Download Mode

To enter emergency mode, reconnect the battery, press and hold "Volume down" + "Home" + "Power ON" buttons.
Back to main menu

1. Click "Reset Screen Lock" button.
2. Put phone in Download Mode.
3. Connect the phone to PC via Micro USB cable.
4. Follow software instructions (prompts).

Note: It is necessary to write CUSTOM recovery to perform "Reset Screen Lock" operation. WARNING! Performing third-party recovery may void the phone's warranty!
Note: After the operation will be successfully completed, You need to draw any pattern, if Pattern Lock was set, or enter any password, if Password Lock was set.
Back to main menu

8. Reset FRP/Reactivation Lock

Method 1. Via Download Mode (Persistent)

1. Click "Reset FRP/Reactivation" button.
2. Put phone in Download Mode.
3. Connect the phone to PC via Micro USB cable.
4. Follow software instructions (prompts).

Back to main menu

9. Read QCN

1. Connect powered-on phone to PC via Micro USB cable.
2. Install necessary driver.
3. Click "Read QCN" button.
4. Follow software instructions (prompts).

Back to main menu

10. Write QCN

1. Connect powered-on phone to PC via Micro USB cable.
2. Install necessary driver.
3. Click "Write QCN" button.
4. Follow software instructions (prompts).

Back to main menu

11. Write Certificate

1. Root your phone manually.
2. Wipe Security
3. Connect powered-on phone to PC via Micro USB cable.
4. Install necessary driver.
5. Click "Write Cert" button.
6. Follow software instructions (prompts).

Back to main menu

12. Wipe Security

1. Root your phone manually.
2. Connect powered-on phone to PC via Micro USB cable.
3. Install necessary driver.
4. Click "Repair Security/Wipe Security" button.
5. Follow software instructions (prompts).

Back to main menu

13. Reset MSL

1. Connect powered-on phone to PC via Micro USB cable.
2. Install necessary driver.
3. Click "Reset MSL" button.
4. Follow software instructions (prompts).

Back to main menu

14. Fast Reset MSL (without Root)

1. Connect powered-on phone to PC via Micro USB cable.
2. Install necessary driver.
3. Click "Fast Reset MSL" button.
4. Follow software instructions (prompts).

Back to main menu

15. Download Mode

To enter emergency mode, reconnect the battery, press and hold "Volume down" + "Home" + "Power ON" buttons.
Back to main menu