SM-G532G Direct FRP Remove Successfully FRP Unlocked Without ADB Thanks Octupas

4. Write Firmware

1. Put phone into Download Mode.
2. Connect the phone to PC via Micro USB cable.
3. Install required driver.
4. Select firmware file.
5. Click "Write firmware" button.
6. Follow software instructions (prompts).

Note: Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Back to main menu

5. Direct Unlock

1. Take out SIM card from phone.
2. Root your phone manually.
3. Connect powered-on phone to PC via Micro USB cable.
4. Install necessary driver.
5. Click "Unlock" button.
6. Follow software instructions (prompts).

Back to main menu

6. Read unlock codes

1. Take out SIM card from phone.
2. Root your phone manually.
3. Connect powered-on phone to PC via Micro USB cable.
4. Install required driver.
5. Click "Read codes" button.
6. Follow software instructions (prompts).

Note: To enter unlock code, please perform the following steps:

1. Turn phone off.
2. Insert unsupported SIM card.
3. Turn phone on.
4. Enter PIN code (if needed).
5. In unlock PIN window enter proper unlock code and press "Unlock" button.
6. Restart the phone.

Back to main menu

7. Read Certificate

1. Root your phone manually.
2. Connect powered-on phone to PC via Micro USB cable.
3. Install necessary driver.
4. Click "Read Certificate" button.
5. Follow software instructions (prompts).

Back to main menu

8. Download Mode

To enter Download Mode, power off the phone, press and hold "Volume down" + "Home" + "Power ON" buttons.
Back to main menu

9. FAQ

Q: My phone not found by program. How can I configure my phone?

A: Provide following steps:

1. Disconnect USB cable from phone (if connected).
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Press "Read Info" in Octopus Samsung software.

Platform: Samsung Android
Selected port: COM1
Selected model: SM-G532G
Searching for a phone (waiting for ADB device)...
Reading info...
Detected phone model: SM-G532G
Firmware compiled date: Thu Sep 21 17:59:11 KST 2017
PDA version: G532GDXU1AQI2
CSC version: G532GOLB1AQI2
SW version: G532GDXU1AQA3
Phone SN: R58HC37JCVF
Android version: 6.0.1 (MMB29T)
Sales code: THL
Country: THAILAND
HW platform: mt6737t
HW Chip: MT6737T
HW Modem: MT6737T
Security patch level: 2017-08-01
SIM 1 status: ready
SIM 2 status: ready
Codename: grandppltedx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 2.6.3 Software version.