USA Canada Australia Samsung N950U AT&T Unlock Read Code By Samsung Tool PRO v.30.7

  UNLOCK INSTRUCTIONS:
    Unlocking with original MSL code:
    Warning! Knox warranty must be active (0x00)!
    If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
  1. Phone must be powered on.
  2. Run dialer and type *#0*# (service mode will appear).
  3. Connect the phone to UART cable, choose correct COM port in port settings.
  4. Press 'Unlock' button.
  5. Paste MSL code in new opened window and press 'OK'.
 
    Unlocking using Server:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock' button for direct unlock, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings)
 
    Reading codes using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)

Done with Samsung Tool PRO v.30.7Checking Login and Password... OK
Ballance: 85 crd.
You have 85 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 7.1.1
Product code: SM-N950UZVAATT
Phone version: N950USQS3BRA8
PDA version: N950USQS3BRA8
CSC version: N950UOYN3BRA8
CSC country code: USA
CSC sales code: ATT
HW version: REV1.0
Phone SN: R38JB01LVPJ
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-01-01
RF cal date: 2017.11.02
IMEI: 351823092231752
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM5 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (1)
Done with Samsung Tool PRO v.30.7