Code:
Welcome to Medusa Pro Software version 1.3.2.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : H811
SRF : D:/Flash phone/Medusa Pro/firmwareFolder/LG_H81120r_EMMC_.srf
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 032G74
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB
---------------------------------------------------------------
CID Info
CID : 110100303332473734001F53A2B8425F
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 032G74
Product revision : 0.0
Product serial number : (hex) 1F53A2B8
Manufacturing date : 04/2015
---------------------------------------------------------------
CSD Info
CSD : D02700320F5903FFFFFFFFE78640009B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Boot partition enable : Device not boot enabled (default)
Partition config : 00000000
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15269888 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/032G74_19_02_2017_15_10_35.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.2; FW: 1.15.
Erasing. Please wait... Done.
SW: 1.3.2; FW: 1.15.
Reapairing from file "D:/Flash phone/Medusa Pro/firmwareFolder/LG_H81120r_EMMC_.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing pmic partition... Done.
Writing sbl1 partition... Done.
Writing tz partition... Done.
Writing sdi partition... Done.
Writing hyp partition... Done.
Writing rpm partition... Done.
Writing aboot partition... Done.
Writing misc partition... Done.
Writing persist partition... Done.
Writing sec partition... Done.
Writing laf partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing raw_resources partition... Done.
Writing factory partition... Done.
Writing fota partition... Done.
Smart Repair is successfully complete.
SW: 1.3.2; FW: 1.15.
Disconnected.
reflash by Octopus
Code:
Welcome to Octoplus/Octopus Box LG Software version 2.5.8 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM152 Selected model: H811 Reading info... Could not detect mode! Performed by 2.5.8 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM152 Selected model: H811 Reading info... Model ID: LG-H811 IMEI: 352392-07-283084-2 Android version: 5.1 Battery level: 50% SW Version: H81110n Mode: Emergency Initializing flash...OK SW version: LGH811AT-01-V10n-310-260-AUG-17-2015-ARB02+0 Android version: 6.0 LAF Version: 1.1 Product ID: PT01S150604004273 IMEI: 352392-07-283084-2 Target operator: TMO Hardware: rev_10 Opening "H811V20r_00_0111.kdz"...OK Firmware version: H81120r Firmware model: LG-H811 -------------------------------------------------------------------------------- Writing phone firmware without real necessity is at your own risk. Downgrade may lead to phone damage! Please, make sure the phone's battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during the flashing! -------------------------------------------------------------------------------- Verifying checkSums...OK Setting options...OK Reading partitions...OK Formating USERDATA...OK Formating ENCRYPT...OK Writing 1/67 PrimaryGPT_0.bin...OK Writing 2/67 modem_32768.bin...OK Writing 3/67 pmic_229376.bin...OK Writing 4/67 sbl1_230400.bin...OK Writing 5/67 tz_232448.bin...OK Writing 6/67 sdi_234496.bin...OK Writing 7/67 hyp_235520.bin...OK Writing 8/67 rpm_236544.bin...OK Writing 9/67 aboot_237568.bin...OK Writing 10/67 sbl1bak_241664.bin...OK Writing 11/67 pmicbak_243712.bin...OK Writing 12/67 tzbak_244736.bin...OK Writing 13/67 hypbak_246784.bin...OK Writing 14/67 rpmbak_247808.bin...OK Writing 15/67 abootbak_248832.bin...OK Writing 16/67 sdibak_252928.bin...OK Writing 17/67 persist_294912.bin...OK Writing 18/67 sec_376832.bin...OK Writing 20/67 laf_393216.bin...OK Writing 21/67 boot_491520.bin...OK Writing 22/67 recovery_573440.bin...OK Writing 23/67 raw_resources_770048.bin...OK Writing 24/67 raw_resourcesbak_778240.bin...OK Writing 25/67 factory_917504.bin...OK Writing 26/67 system_1048576.bin...OK Writing 27/67 system_1312904.bin...OK Writing 28/67 system_1576912.bin...OK Writing 29/67 system_1837192.bin...OK Writing 30/67 system_1841240.bin...OK Writing 31/67 system_2101200.bin...OK Writing 32/67 system_2361480.bin...OK Writing 33/67 system_2365528.bin...OK Writing 34/67 system_2625488.bin...OK Writing 35/67 system_2885768.bin...OK Writing 36/67 system_2889816.bin...OK Writing 37/67 system_3149776.bin...OK Writing 38/67 system_3410056.bin...OK Writing 39/67 system_3414104.bin...OK Writing 40/67 system_3674064.bin...OK Writing 41/67 system_3936208.bin...OK Writing 42/67 system_4198352.bin...OK Writing 43/67 system_4460496.bin...OK Writing 44/67 system_4722640.bin...OK Writing 45/67 system_4984784.bin...OK Writing 46/67 system_5246928.bin...OK Writing 47/67 system_5509072.bin...OK Writing 48/67 system_5771216.bin...OK Writing 49/67 system_6033360.bin...OK Writing 50/67 system_6295504.bin...OK Writing 51/67 system_6557648.bin...OK Writing 52/67 system_6815744.bin...OK Writing 53/67 system_7077888.bin...OK Writing 54/67 system_7340032.bin...OK Writing 55/67 system_7602176.bin...OK Writing 56/67 system_7604360.bin...OK Writing 57/67 system_7608408.bin...OK Writing 58/67 system_8126464.bin...OK Writing 59/67 system_8128648.bin...OK Writing 60/67 system_8132696.bin...OK Writing 61/67 system_8650752.bin...OK Writing 62/67 system_8912896.bin...OK Writing 63/67 system_9175040.bin...OK Writing 64/67 system_9437184.bin...OK Writing 65/67 system_9699328.bin...OK Writing 66/67 system_9703376.bin...OK Writing 67/67 BackupGPT_61070336.bin...OK Reading partitions...OK Formating RCT...OK Formating MPT...OK Finalizing...OK Writing firmware done! Performed by 2.5.8 Software version.
No comments:
Post a Comment