FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check "Repartition" option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on phone in download mode (turn off phone, press vol.down + home + power).
5. Connect phone to PC with USB cable, install drivers if needed.
6. Press "Flash" button.
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on "Build number" in "Settings"-"About phone" to enable "Developer options",
go to "Settings"-"Developer options" and enable "USB debugging".
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press "Read EFS" button to read backup or "Write EFS" to restore.
6. Press "Write CERT" to restore certificates.
7. Press "Write NV DATA" if you need to restore NV backup.
Read certificate operation:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press "Read CERT" button to read certificates.
(Note, that the cert file for this model is unique. You can write cert, wich is readed from this device exactly.)
UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on "Build number" in "Settings"-"About phone" to enable "Developer options",
go to "Settings"-"Developer options" and enable "USB debugging".
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press "Unlock" button and select "New Unlock" for direct unlock.
To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press "Unlock" button and select "Unlock" for direct unlock.
To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press "Read codes" button to read security codes.
To reset Google account activation or Samsung reactivation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press "Reset FRP/React/EE" to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform "wipe data factory
reset" once more, to complete this locks removal.)REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on "Build number" in "Settings"-"About phone" to enable "Developer options",
go to "Settings"-"Developer options" and enable "USB debugging".
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press "Repair" button.
7. Press "Patch Certificate" if you have network problem after repairing.
7. Press "Reset EFS" if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press "Repair DRK" button.
No comments:
Post a Comment