Best 2 way Rooting Samsung J2 Prime G532G,F,M 2017 Marshmallow 6.0.1 With Z3x Or Octopus Box Unlock Tutorial

 
  FLASH INSTRUCTIONS:

  1. Choose correct flash file(s).
  2. If you have PIT file chosen, then you must check "Repartition" option.
  3. Check flashing options if needed (Repartition, EFS clear, Boot update).
  4. Power on phone in download mode (turn off phone, press vol.down + home + power).
  5. Connect phone to PC with USB cable, install drivers if needed.
  6. Press "Flash" button.

 

  BACKUP INSTRUCTIONS:

    Phone must be rooted!
  If the software can't root the phone automatically,
  then you must root your device manually.
  1. Power on the phone.
  2. Enable "USB debugging" in
     "Settings"-"Developer options" for Android 4.0 - 4.1.2 or
     tap 7 times on "Build number" in "Settings"-"About phone" to enable "Developer options" in Android 4.2+.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press "Read CERT" button to read certificates or "Write CERT" to restore.


  UNLOCK INSTRUCTIONS:

    Phone must be rooted!
  If the software can't root the phone automatically,
  then you must root your device manually.
  1. Power on the phone.
  2. Tap 7 times on "Build number" in "Settings"-"About phone" to enable "Developer options",
     go to "Settings"-"Developer options" and enable "USB debugging".
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press "Unlock" button and select "New Unlock" for direct unlock.
  6. Press "Read codes" button to read security codes.
 
    To reset Google account activation lock:
  1. ADB must be activated in any way (you can flash sBoot from combination firmware,
     make sure, that you are not upgrade sBoot).
  2. Connect phone to PC with USB cable, install drivers if needed.
  3. Select device in ADB settings.
  4. Press "Reset FRP" and follow the instructions in program.
  5. When process done, press "Back" on phone and perform factory reset from phone settings.

 .
..
Samsung Galaxy J2 Prime SM-G532F – Official Firmware OS 6.0.1 for flashing with Odin
nstructions for installing firmware multifile.
It is assumed that all the preliminary steps you made, and the flasher device correctly conjugate.
Multifile firmware basically removes all data from the device.
If after downloading and unzipping the firmware you see some BLxxxxxxx.tar file type or CPxxxxxxx.tar.md5 etc. – Means you have downloaded multifile (three-, four-, etc.) firmware.
The names of parts of multi-file firmware (file) correspond to the fields in Odine. However, only since version 3.09 changed field names, which specifies the path to the necessary files, so in older firmware versions and names from the files are old. Below are matching new / old values:
BL = Bootloader (loader)
AP = PDA (CODE)
CP = PHONE (MODEM)
CSC = CSC (regional part)
Firmware.
Do not forget to switch your device to work with Odin (boot mode / Odin mode / Download mode) mode.
In the Odin window, in the respective fields, specify the path to the firmware files:
BL ………. tar.md5 file into a field «BL»
AP File (or CODE) ………. tar.md5 inserted in the «AP»
CP File (or MODEM) ………. tar.md5 inserted in the «CP»
CSC …….. tar.md5 file into a field «CSC»
In the <Options> Program tab, make sure the check mark placed correctly:
- Items Auto Reboot and F. Reset Time are marked;
- Other items are not marked.
Press the <Start> button. Will start the process of firmware.
Do not disconnect the device from the computer during this process!
Firmware usually takes a few minutes.
Upon completion of the firmware the device will reboot.
After rebooting, disconnect the device from the computer.
Done! 
SM-G532F Unlock, Read codes
SM-G532G Unlock, Read codes
SM-G532M Unlock, Read codes

Best 2 way Rooting Samsung J2 Prime G532G,F,M 2017 Marshmallow 6.0.1 With Z3x Or Octopus Box Unlock Tutorial

All Samsung FRP Solution 2018
All Xiaomi Mi Account Remove Solution 2018