Samsung J500H Galaxy J5 Repair Firmwares:
J500HXXU1AOG4 / OXE1AOG4 v5.1.1: Download
J500HXXU1AOI2 / OLB1AOI2 v5.1.1: DownloadSaudi Arabia
Samsung J500H 6.01 Version Firmware Download
Flashing requirements:- Odin Tool (Download)
- Samsung device drivers (Download)
Odin Tools Flashing Tutorial
Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
Samsung J500H Z3X Box Flashing Unlocking Updating Repair Tutorial
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check "Repartition" option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on phone in download mode (turn off phone, press vol.down + home + power).
5. Connect phone to PC with USB cable, install drivers if needed.
6. Press "Flash" button.
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on "Build number" in "Settings"-"About phone" to enable "Developer options",
go to "Settings"-"Developer options" and enable "USB debugging".
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press "Read EFS" button to read backup or "Write EFS" to restore or
press "Write CERT" to restore certificates.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select "DM+MODEM+ADB".
3. Type *#9090# and select "DM/DUN over HSIC".
Or use "Activate Diag" function from "Repair" tab.
4. Connect phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press "Read QCN" button to read NV backup or "Write QCN" to restore.
UNLOCK INSTRUCTIONS:
1. Power on the phone.
2. Type *#0808# and select "DM+MODEM+ADB".
3. Type *#9090# and select "DM/DUN over HSIC".
Or use "Activate Diag" function from "Repair" tab.
4. Connect phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press "Unlock" button for direct unlock.
To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press "Reset FRP" and follow the instructions in program.
5. When process done, press "Back" on phone and perform factory reset from phone settings.
To reset Google account activation or Samsung reactivation lock:
1. Power on phone in download mode (turn off phone, press vol.down + home + power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press "Reset FRP/React/EE" to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.
REPAIR INSTRUCTIONS:
Activate Diagnostic Port:
1. Tap 7 times on "Build number" in "Settings"-"About phone" to enable "Developer options",
go to "Settings"-"Developer options" and enable "USB debugging".
3. Select device in ADB settings.
2. Press "Activate Diag" button.
Reset EFS, Disable Factory Mode:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on "Build number" in "Settings"-"About phone" to enable "Developer options",
go to "Settings"-"Developer options" and enable "USB debugging".
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press "Reset EFS" if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
6. If you have yellow table on your device screen, then press "Disable Factory Mode" button.
Wipe EFS/NVM:
If you have "IMEI null/null" or "Phone baseband unknown" errors,
Then you can try to repair this errors with this function.
1. Power on phone in download mode (turn off phone, hold Volume Down + Home + Power).
2. Connect USB cable, install drivers if needed.
3. Press "Wipe EFS/NVM" button to deactivate security.
4. Wait till phone reboot.
No comments:
Post a Comment